Icon Airframe Infernal Full Face Helmet

The Icon Airframe helmet represents the pinnacle in modern helmet design. The Airframe is equipped with multiple safety and comfort features, developed through exhaustive lab research and real world testing. Premier manufacturing processes assure that the Airframe meets the highest quality and safety standards in the world. When fitted property, the precisely engineered Fiberglass/Dyneema/Carbon Fiber composite shell and energy absorbing dual-density EPS liner greatly reduce the possibility of head injuries in the event of an accident. To keep you focused on what's ahead of you the Airframe is fitted with Icons new Proshield. Not only is the Preshield available in a variety of tinted styles with side plates for more graphic real estate, it features the prolock shield lock system to keep you shield locked down. Even during those 150mph head-checks. We know people come in all shapes and sizes, so why not helmets? The Airframe is available in XXS-3X with interior parts that are interchangeable across the entire size range for tailoring just the right fit. Additionally, the HydraDry moisture wicking material used throughout the interior comfort liner and extensive venting system combine to produce the industry's most ventilated and comfortable helmet.

Icon Airframe Helmet Features

• DOT & SNELL M2005 Approved

• Fiberglass/Dyneema/Carbon fiber shell

• Removable molded breath deflector reduces shield fogging

• Oversized intake and exhaust ports

• Removable chin curtain

• Quick-change fog-free Proshield with sideplates

• Removable molded breath deflector reduces shield fogging

• Removable Hydradry moisture wicking liner

• Prolock secure shield locking system

Choosing Airframe Size

No helmet can protect the user against all foreseeable impacts. For your safety, please choose a helmet in the size which fits your head. For maximum head protection, should fit properly, and the retention system must be securely fastened under the chin. To ensure a proper fit, please follow the steps below: Position the helmet on your head so that it sits low on your forehead. If you can't see the edge of the brim at the extreme upper range of your vision, the helmet is probably out of place. Adjust the retention system so that when in use, it will hold the helmet firmly in place. With the chinstrap still fastened as tightly as possible, take hold of the helmet with both hands. Without moving your head, try to move the helmet up and down, and from side to side. You should feel the skin of your head and face being pulled as you try to move the helmet. If you can move the helmet around easily, it is too big. Try a smaller size. Now, with the chinstrap secured, put your hands flat on the back of the helmet and try to pull the helmet off by rotating it forward. Then, put your hands on the front of the helmet, and try to push the helmet off by rotating it toward the rear. If the helmet starts to come off in either direction, the helmet is either too large, or the chinstrap is not fastened tightly enough.

Back to Top

Icon Helmet Sizing Chart

To find your head diameter wrap a flexible tape measure approximately one inch above eyebrows and ears. Sizing information is provided by the manufacturer and does not guarantee a perfect fit. Please use this chart as a guide only.

Always remember, safety is the most important aspect of owning a scooter or motorcycle, Always wear a helmet regardless of the laws in your state. Those Laws won't protect you in a accident.

Back to Top